how to set controller bindings for thug 2 pc

There are three kinds of Security methods, we recommend you to use WPA-PSK/WPA2-PSK, which is safe and easy to use. If you enable the AP Isolation, the clients connected to the same SSID of the same AP will not be able to communication with each other. The SSID is the wireless network’s name that you will find in your client devices. Please go to Wireless – Wireless Service and click the Add button to create a SSID as shown below: The system will ask you to set up the Username and Password the first time when you login to the management page as shown below.Īfter that, you need to login to the web page with the Username and Password you set just now.Ģ.3 By default settings, the AC Controller will find the CAP automatically as shown in the picture below: Then open the web browser like Chrome or Firefox, and type in the address bar and press the Enter key. Please connect a PC to the AC Controller directly, if you have connected the network as shown in the network topology, the DHCP Server in the Router will assign an IP address for you PC automatically, but if not, please design a static IP address in the range 192.168.0.x for PC manually as shown below Please wait until the LED is static Green which means the CAP boots and initializes successfully.Ģ.2 Login to the AC Controller’s Web Page And please ensure that you can get online when you connect your PC to the PoE switch directly.Ģ.1 Change the CAP300 to the FIT mode (Default Mode) and then connect it to the PoE switch.

Please set up your wired network as illustrated in the network topology, you may need to change the default management IP address of the PoE switch to make sure there is no IP conflict. The DHCP server on the Router will assign the IP addresses for all the clients connected to the CAP’s wireless network and the switch’s wired network while the DHCP Server on the AC Controller will assign the IP address for the CAP only. All the devices are in the same subnet, so that the CAP can be controlled and managed by the AC Controller locally. Here we use a typical network topology to explain how set up a simple wireless network using TP-LINK AC/CAP serial products.Īs shown in the picture above, the CAP300 is connected and powered by the PoE switch, the AC Controller is connected to the PoE switch as well.

How to set controller bindings for thug 2 pc